Cyr Wheel Show Tech Spec

Description

  • A glow Cyr wheel show involving one performer 
  • The show is performed LED costumes.
  • This is a front-on show which look best within 60º either side of centre.

Optional extras

  • If any Pixel Umbrellas are booked you will need to provide one member for you’re events staff per umbrella. We will need 5mins to train your staff prior to the show. The staff will be spinning the umbrella in the finale of the show.

Show length

  • 7mins

Number of crew

  • Two (one performer and one tech person)

Requirements

  • Stage/performance space: 6m*5m (minimum 4.5m*4.5m)
  • No obstructions or audience to be seated 1m in front of the stage
  • Height above performance area: 5m (minimum 3m)
  • The stage surface must be hard, smooth and level (no carpet)
  • 30mins set up time on stage (minimum 15mins) 
  • Our laptop needs to be set-up within 2m of the stage and next to where the performers enter 
  • One 13A British plug socket
  • One changing room
  • Van access

Recommendations

  • The performance area is raised
  • Audience remains seated for the show

Lighting

  • Blackout or as close to as can be achieved for the duration to the show.
  • We will provide 2 x LED UV cannons which will be connected to our laptop via XLR leads 
  • House lights up for final bow

Sound

  • All music to be played off the laptop on the side of stage.
  • We will provide 2 x 25m XLR leads (left and right channel) to run from the stage into the sound desk
  • Alternatively the laptop has a 3.5mm Jack input.

 For Overseas performances

  • We will need four hold bags.
  • We will need access to 13A, 240V power supply and two UK adaptors
  • Accommodation, food and all transport from the airport needs to be provided.